SYSTCO-UNILAP LTD
Clayfields Industrial Estate
Tickhill Road
Balby
Doncaster
South Yorkshire
DN4 8QG
Tel:+44 (0) 1302 858530
Fax:+44 (0) 1302 310291

MORTISE CHISELS AND CHAINS

Mortise Chisels for Oscillating Machines

 The chisel is a cutting tool assembled on an eccentric head and produces mortises in wood through an oscillating motion. The tool body is made of steel and the cutting blade is made of an HSS steel plate. The chisel can be simple or double( to obtain 2 mortises simultaneously) and can have 1 and 2 inclined sides ( to obtain slanting  mortises)
Mortice chisel diagram

Straight Mortise Chisels

  • Chisels can be made with blowing devices
  • Available to fit most makes of machines
  • Information required when ordering:-
  • Make of machine and type
  • S= width of mortise
  • L= length of mortise
  • P= depth
 

Straight Double Mortise chisel

  • This type of chisel allows you to produce 2 mortises at the same time
  • Available to fit most makes of machines
Mortice chisel diagram


Mortise chisel with heel

  • Chisels with heel when 2 different depths are required
  • Blind hole or through hole
  • Available for a wide variety of machines
  • S= width of mortise
  • L = length of mortise
  • Lc =length of heel of mortise
  • P= depth
  • Pc= depth of heel

 Double Mortise chisel with heel

  • Chisels with heel when 2 different depths are required

 

Mortising Chains Single and Double

  • Chains are available with different pitches 22.6, 16.2 and 13.7
  • Used to produce rectangular mortises in wood
Unilap.co.uk © 2007 HomeCompanyProductsServicesFAQsContact
footer image footer image